| Property | Value |
| • Wattage: | 8W |
| • Color: | 2700K Warm White |
| • Size: | A19 E26 |
| Property | Value |
| • Voltage: | 120V |
| • Luminous Flux: | 800 lm |
| • Wi-Fi Network: | 2.4Ghz(only) |
Voice Control
Smart bulbs that work with Alexa, Google Home, just give a simple voice command to control your light devices with the smart light bulb. No hub required, Only Support 2.4GHz wifi (Not 5G)
App & Remote Control
Make it possible to control your LED bulb by your smart phone anytime anywhere, enhance your home devices intelligent with this unique WiFi bulb. You can also create a group for all of your smart light bulbs and control them with a single button.
Timer & Schedule
Schedule the smart lights on/off automatically via your phone App. Set the Alexa light bulb turn on or off at a specific time. Turn all lights on the moment you back home, turn all lights off when you are away from home
Brightness Dimmable
The bulbs have a dimming range from 1% to 100%, you can set the brightness for different usage such as kitchen light, reading light, living room light or bedroom lamp. Adjust your smart bulb to full brightness to wake your kids up in the morning or dim for them to fall asleep securely at night.
Forget the manual switch once pairing successfully.
Smart bulbs could work according to App and Voice Command. Clap the switch after well-connecting, that may cause the bulbs to blink and getting into pairing mode after turning on.
Skills for Smart bulb always keep good connection.
Several routers may be needed in building a really smart home system, especially for a big house and many smart devices. Enough routers will make a good connection and reduce dropping wifi for too crowded and far distance.
Q1:Why my bulbs are blinking?
The bulb starts blinking indicating that it is in pairing mode and ready for installation. Turn on/off via manual switch may result in a flash. Once connected to the wifi, forget the manual switch, and control the light by App and Voice.
Q2:Why my smart bulbs buzzing?
Smart bulbs need full voltage to be supplied to them. Buzzing is often caused by the less voltage, for example, using dimmers to change the brightness,turn on the larger appliance(microwaves), Home voltage changes.
Additionally, LED bulbs are known to generate a little“buzz”, but the noise level should not be noticeable from a distance of over 3 feet by FCC regulations.
How to App control?
Step 1: Download the App and keep your phone connected to 2.4G Wifi (5G is not supported).
Step 2: Turn on and off the bulb 3 times to switch the bulb to Easy Mode (Recommended).
Step 3: Click "+" to add device, select the Lighting(wifi) to connect.
Step 4: There is a Pairing Mode at the upper right. Ap Mode is recommended.
Step 5: Pair Smart Device-- enter Wi-Fi password--connect the phone to the hotspot “SmartLife-XXX” (Ap Mode) --add Smart Device successfully to 2.4G wifi network.
Note:The wire color of each version is a little different, the name of the wire could easily be found at the wire port. If you meet any questions, feel free to get help from us.
Adding to cart succeed!
items in cart.
Total:
Requires a minimum purchase of {MinPrice}. And you still need to meet the requirements.
Proceed to Checkout Return to Shopping
